Home › Drywall for Remodels and Additions
Atlas Drywall Oklahoma City provides drywall for home remodeling in Oklahoma City, OK including additions, basement finishes, and garage conversions. We coordinate with your contractor, frame interior walls if needed, and hang and finish drywall so your new space blends seamlessly with the existing home.
Atlas Drywall Oklahoma City provides professional drywall for home remodeling throughout Oklahoma City, OK, Oklahoma and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (405) 860-5726 or request your free quote.
Drywall for Home Remodeling in Oklahoma City
When you remodel or add onto your home in Oklahoma City, the drywall work is what makes the new space feel like it truly belongs with the rest of the house. At Atlas Drywall Oklahoma City, we focus specifically on drywall for home remodeling and additions, which is different from new construction work. In a remodel, we are tying new walls and ceilings into existing framing, old textures, and lived-in spaces, so planning and protection matter as much as the drywall itself.
We start every remodeling drywall project with a walk through of the areas you are changing. We look at existing wall thickness, ceiling height, insulation, and textures so we can match the new work to what you already have. For older Oklahoma City homes, we often run into a mix of plaster and drywall, past repairs, and non standard framing. We explain what needs to be removed, what can stay, and how we will bring everything to a smooth, paint ready finish that looks like it has always been part of your home.
Because we are working inside lived in homes, we also plan how to protect your belongings, where to stage materials, and how to manage dust and noise. This preparation keeps the project smoother for you and allows your general contractor or other trades to stay on schedule.
Step by Step: How Remodeling Drywall Work Is Done
Drywall for home remodeling follows a clear sequence so your project does not stall. Once framing, electrical, and plumbing are in place, Atlas Drywall Oklahoma City comes in for the hang, tape, and finish.
Hanging: We measure and cut sheets to fit new or modified framing, typically using 1/2 inch drywall for walls and either 1/2 inch or 5/8 inch for ceilings, depending on code, span, and sound goals. In remodels we pay extra attention to tying into existing corners and ceiling lines so you do not see a hump or recess where old meets new. We fasten with screws set to the right depth to avoid nail pops later.
Taping: We cover all seams with joint tape and the first coat of joint compound. In remodels and additions we often use paper tape for inside corners for sharp lines and either paper or fiberglass tape for flat seams, depending on movement risk. We also treat any cracks in the old drywall that tie into the new area so they do not reappear.
Finishing: We apply multiple coats of compound, sanding between coats to create a smooth, Level 4 or Level 5 finish, depending on your paint and lighting plan. For open concept remodels with large windows, we often recommend a higher finish level because natural light in Oklahoma can highlight every imperfection. Only after this is complete do we move to texturing and final touch ups.
Matching Existing Walls, Textures, and Ceilings
In remodeling, the hardest part is rarely hanging drywall. It is making the new work disappear into the existing house. Atlas Drywall Oklahoma City specializes in texture matching so your addition or remodel does not have obvious transitions.
Common local textures include light orange peel, knockdown, and smooth with a subtle roller pattern. We study your existing walls under good light, then mix compound and test small areas so we can match thickness, pattern, and application method. We adjust air pressure, spray tips, and hand tools until the new texture blends in once painted.
For ceilings, we often deal with older popcorn or heavier patterned textures. In many Oklahoma City remodels, homeowners choose to remove popcorn in the remodeled area and sometimes in adjacent rooms so everything feels consistent. We can scrape, skim coat, and refinish ceilings to a more modern look, or repair and blend into remaining textured ceilings if you prefer to keep them. The goal is that guests cannot tell where the old house stopped and the addition began.
Drywall Options for Additions, Basements, and Garages
Different parts of a remodeling project need different drywall types. Using the right product in the right place affects durability, safety, and how often you will need repairs.
Standard interior walls: Most interior partitions use 1/2 inch regular drywall, which is cost effective and works well where moisture is not a concern. In remodels, we often match thickness to your existing walls so trim and casings line up correctly.
Moisture resistant and mold resistant board: For bathrooms, laundry rooms, and basement remodels in Oklahoma City, we commonly use moisture resistant or mold resistant drywall. With our humid summers and the potential for condensation in basements, these materials help prevent soft spots and mold growth. They still need good ventilation and proper tile backer in wet areas, but they are smarter choices than standard board near moisture.
Garage and fire rated areas: When you add a room above a garage or expand near an attached garage, code often requires 5/8 inch Type X fire rated drywall on certain walls and ceilings. Atlas Drywall Oklahoma City is familiar with local code requirements and coordinates with your contractor and inspector to make sure these areas are done correctly.
Sound control: For home offices, media rooms, or bedrooms near busy streets, we can add sound dampening options like double layers of drywall, sound channels, or specialized sound control board. We explain the pros, cons, and costs so you can decide what fits your budget and how you use the space.
What Affects Cost in Drywall for Home Remodeling
Drywall pricing for remodels and additions is based on more than just square footage. Knowing what drives cost helps you plan and compare quotes fairly.
Scope and access: Simple, open rooms with good access cost less per square foot than tight hallways, vaulted ceilings, or attics with limited access. Two story foyers, tray ceilings, and complicated framing require more time, lifts, and safety setups, which increases labor.
Level of finish and texture: A basic Level 3 finish with a light texture is cheaper than a Level 5 skim coat for ultra smooth walls under critical lighting. If you want very smooth walls with no visible seams in a sunny living room facing west, that extra finishing work will be reflected in the price.
Demolition and repairs: Removing old plaster, taking down damaged drywall, or fixing existing cracks, nail pops, and water damage adds to the total. In many older Oklahoma City homes, we must straighten framing or fur out walls to align old and new, which takes additional time.
Material upgrades: Moisture resistant board, fire rated board, sound control systems, or specialty corner beads and trims cost more than standard materials. We list these separately in our estimates so you see exactly what you are paying for.
Occupied homes: Working in a lived in home usually takes longer because of protection, daily cleanup, and staged work around your schedule. We factor in floor protection, plastic barriers, and dust control when we price a remodeling project.
Dealing With Common Remodeling Drywall Challenges
Remodeling projects in Oklahoma City often uncover surprises once the walls are opened. Atlas Drywall Oklahoma City plans for these issues so they do not derail your schedule.
Uneven or out of plumb framing: Older homes sometimes have studs that are bowed or not vertical. Before hanging new drywall, we will shim or plane framing where needed so the finished walls look straight. If we see a structural concern, we point it out to your contractor immediately.
Cracks and movement: Seasonal temperature swings and dry winter air can cause some movement in framing. To reduce future cracking where new drywall meets old, we use proper control joints where needed, good quality joint compounds, and fiber tape or additional reinforcement in high stress areas.
Moisture and past damage: If we find old water damage, we do not simply cover it up. We look for the source, such as a roof leak or plumbing line, and recommend that be fixed before finishing. Then we cut out compromised drywall, treat any mold appropriately, and install new board so the repair lasts.
Dust and cleanup: Drywall work creates fine dust, especially during sanding. We use plastic containment, vacuum sanding where appropriate, and daily cleanup so the rest of your home stays as livable as possible during the remodel. We coordinate with painters so the space is truly ready when they arrive.
Scheduling, Weather, and Working With Other Trades
Even though drywall is inside, Oklahoma City weather still affects remodeling schedules. High humidity during summer slows drying time for joint compound, which can add a day between coats if dehumidification is not used. In winter, unheated additions or open structures need temporary heat so mud can cure properly and not crack.
Atlas Drywall Oklahoma City coordinates closely with your general contractor, electrician, plumber, and HVAC team. We schedule our start once inspections are passed and the space is ready for insulation and board. We also plan around flooring and trim installers so heavy drywall work does not damage finished surfaces.
We provide clear timelines for hang, tape, and texture, and let you know what needs to be in place before we arrive, such as rough mechanicals and windows fully installed. For homeowners managing their own remodels, we walk you through a realistic order of operations so you are not installing cabinets or flooring too early.
When the drywall phase is complete, we do a walkthrough with you or your contractor to address any touch ups before painters start. The goal is a seamless transition from framing to finished walls so your remodeled space or new addition feels solid, quiet, and ready for many years of use.
